OH8FKS

Raffaello Tesi

OH8FKS: Passion for satellites!Base station is TS-2000 with a Windom OCF dipole for HF, HB9CV Duoband 2m/70cm and Arrow Antenna II for Satellites.

For satellite portable I use an FT-817 with the Arrow Antenna II. Sometimes I couple my FT-817 with an FT-857 for full duplex.

Up-to-date info and contact information on qrz.com.

News

Working mainly satellites from several locations, home locator KP25ra, occasionally from KP34uf and other locations around the world.

NOTE for SSB satellites. When working /P I’m working half duplex with an FT-817 (5W), so please note the following:

  • FO-29: I’ll use fixed TX frequency of 145.960 MHz LSB (no doppler adjustment)
  • AO-7: I’ll use fixed TX frequency of 432.162 MHz LSB (no doppler adjustment)

NOTE for LoTW users: I update QSOs almost immediately, but please make sure to use the right call, with prefix and suffix. E.g. for Svalbard it is JW/OH8FKS/P

When logging a satellite QSO, please enter the uplink (TX) frequency as the QSO frequency!

Base station rig is TS-2000 with a Windom OCF dipole for HF, HB9CV Duoband 2m/70cm and Arrow Antenna II for Satellites. For satellite portable I use an FT-817 with the Arrow Antenna II.

After many years of QRT, I’ve been active from 2009 to spring 2014 from the Icebreaker Sampo docked in Kemi, Finland, after which I’ve relocated my station in Oulu, still in Northern Finland, and from 2015 experimenting satellites from several locations.

More pages on DXing.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.